Product ID:WELD-ON 28 COMPONENT-PART C
MSDS Date:03/15/1990
FSC:8040
NIIN:00-266-0815
Kit Part:Y
MSDS Number: BJQPZ

CHEMICAL COMMODITIES AGENCY,INC

27447 PACIFIC STREET
HIGHLAND, CA 92346
US

Emergency Phone: 714-864-2310

Info Phone: 714-864-2310

Cage: 60777

CHEMICAL COMMODITIES AGENCY, INC.

HIGHLAND, CA 92346-2640 US

Telephone: 909-864-2310

Cage: 60777

METHYL METHACRYLATE (SARA III)

CAS: 80-62-6

RTECS: OZ5075000

Fraction By Weight: > 85%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLIDINE

CAS: 1300-73-8

RTECS: ZE8575000

OSHA PEL S, 5 PPM

ACGIH TLV: S, 0.5 PPM; A2; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION WILL CAUSE DROWSINESS,
DIZZINESS AND NAUSEA FROM MONOMER PORTION;THE DMA CAN CAUSE
CYANOSIS. SKIN CONTACT MAY CAUSE CHAPPING OR MILD DERMATITIS. MAY
CAUSE EYANOSIS.

First Aid:INHALATION:WRAP PATIENT IN A BLANKET.PROVIDE PLENTY OF FRESH
AIR AND CALL A PHYSICIAN.SKIN CONTACT:WASH WITH PLENTY OF WATER AND
SOAP IMMEDIATELY.EYE CONTACT:FLUSH WITH WATER FOR 15 MIN AND GET
MEDICA L ATTENTION IMMEDIATELY. IF SWALLOWED, INDUCE VOMITING AND
CALL A PHYSICIAN.

Flash Point Method:TOC
Flash Point:70F/21C
Lower Limits:2.1
Upper Limits:12.5
Extinguishing Media:DRY CHEMICAL OR CO2 EXTINGUISHER
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS.WATER FOG
NOZZLES OR CHEMICAL FOAMS NEEDED TO EXTINGUISH FLAMING POOLS OF
METHYL METHACRYLATE.

Spill Release Procedures:FLUSH SPILLS IMMEDIATELY WITH PLENTY OF WATER.
EVACUATE BUILDING IF NECESSARY. ELIMINATE ALL IGNITION SOURCES.
AVOID EXPOSURE OF PERSONNEL TO TOXIC CONCENTRATIONS OF FUMES.

Handling and Storage Precautions:FLAMMABLE LIQUID:I.C.C. RED LABEL.
STORE IN COOL AREAS BELOW 70F AWAY FROM SOURCES OF HEAT.
Other Precautions:FOLLOW RECOMMENDATION ON LABEL AND PRODUCT
LITERATURE.

Respiratory Protection:NOT NECESSARY IF ADEQUATE VENTILATION IS
PROVIDED. USE RESPIRATOR FOR ORGANIC VAPOR FOR CONFINED AREAS, E.G.
MSA RESPIRATOR #459433.
Ventilation:LOCAL EXHAUST PROVIDE ADEQUATE (PREFERABLE MECHANICAL) LOW
POINT - 6 AIR CHANGES PER HOUR.
Protective Gloves:RUBBER
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES.
Other Protective Equipment:RUBBER APRON AND SAFETY SHOWER NEAR WORK
AREA.
Supplemental Safety and Health

Boiling Pt:B.P. Text:214F,101C
Vapor Pres:29
Vapor Density:3.42
Spec Gravity:0.939-0.943
Evaporation Rate & Reference:3 (BUAC = 1)
Solubility in Water:1.6
Appearance and Odor:THIN CLEAR LIQUID, PUNGENT ODOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
COROSSIVE TO ALUMINUM,MAGNESIUM,PLEXIGLAS,OTHER PLASTIC & FABRICS.STORE
IN STAINLESS STEEL,GLASS OR POLYETHYLENE CONTAIN
Stability Condition to Avoid:FIRE OR ABNORMAL TEMPERATURES OR CONTACT
WITH OXIDIZING MATERIALS.
Hazardous Decomposition Products:UPON HEATING, TOXIC FUMES MAY EVOLVE
AT DECOMPOSITION.
Conditions to Avoid Polymerization:GENERATE HEAT THROUGH
POLYMERIZATION.METHYL METHACRYLATE POLYMER CAN FORM WITH FIRE OR
ABNORMAL TEMPS/OXIDIZING MATERIAL

Waste Disposal Methods:WASH WITH WATER AND DISCHARGE INTO STORM SEWER.
FOLLOW LOCAL AND STATE REGULATIONS. DO NOT LET MATERIAL DRAIN INTO
DOMESTIC SEWER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.